Fully assembled Strike Force small block Chevy aluminum cylinder heads. The intake roof has been raised for enhanced airflow in a 23 degree head. Intake runner volume is 200cc, chamber volume is 64cc with STRAIGHT or ANGLE spark plugs. The heads have an extra thick deck, hardened intake and exhaust seats with manganese bronze valve guides. Heads are complete with +.100" 2.055 or 2.020" stainless steel intake and 1.60" stainless steel exhaust valves, chromoly retainers, 10degree locks, 3/8 or 7/16 screw in studs and 5/16 or 3/8 guide plates. Assembled with 120lbs@1.830" single 1.44" diameter valve springs with damper. This combination will allow up to a .600" lift hyd. camshaft.
Strike Force Small Block Chevy 2.02 Intake 1.6 Exhaust
Strike Force Small Block Chevy 2.050 Intake 1.6 Exhaust
ALL HEADS HAVE BEEN FLOWED ON A SUPERFLOW 1020 FLOWBENCH. IF YOU ARE INTERESTED IN FLOW RESULTS PLEASE SEE FIGURES ON OUR WEB PAGE. These heads come assembled and are ready for installation*!!
*The heads will require Felpro 1206 intake gaskets, Felpro 1444 exhaust gaskets, Suitable head gasket and head bolts for aluminum heads along with longer pushrods compatible with guide plates. Champion RC12YC Spark plugs or equivalent should be used.
If you have any questions or are in need of gaskets, head bolts, or anything else to get your project up and running feel free to call us.
All heads are in stock and ready to ship. Dont pass up these great deals.
)
)
)
)
If have any questions please feel free to call us at 608-836-8130
These heads are fully assembled at:
Performance Engine and Machine
3010 Parmenter St
Middleton, Wi 53562